Vestax HDR-V8 Operational Manual page 5

36 MIDI IN JACK
This jack is used to connect the MIDI
out of a Sequencer, computer,
synchronizer or other MIDI
equipment. MIDI clock is input and
recorded from this jack.
37 MASTER OUT JACK L&R
These jacks are the stereo master
output jacks to connect to the power
amp, mixing console, mixdown tape
machine, etc.
38 AUX SEND JACK
These jacks send the AUX signal
that is adjusted by AUX send level
controls.
39 COAXIAL DIGITAL OUT PUT JACK
This jack is used to connect to the
digital coaxial SP/DIF output from the
HDR to the input of a DAT or the
other digital equipment. An RCA plug
cable is used for this connection.
40 COAXIAL DIGITAL INPUT JACK
This jack is used to connect the
digital coaxial SP/DIF output from a
DAT or the other digital equipment to
the HDR. An RCA plug cable is used
for this connection.
41 OPTION SLOT I & 2
These slots are for the optional
boards. optional boards for the HDR
series can be installed by removing
the blank panel and installing the
optional board in accordance with its
instructions.
*Installation of an Optional board is
to be performed by authorized
Vestax HDR dealer.
Vestax is not responsible for any
injury to the user or damage to the
unit by opening of the top cover by
an unauthorized person.
42 FUSE HOLDER
Standard slow blow 1/4 x I-1/4 fuse
is used. Please refer to the following
table for the current rating.
43 AC INLET
Please use the included AC cable
Vestax will not be responsible for
any damage caused by using a
different AC cable or by connecting
to the incorrect voltage.
5