Vestax HDR-V8 Operational Manual page 16

DELETE
The portion of the track between A and B positions can be deleted To keep information that is after the B
position in the same place as before the delete, select ERASE (No shift ) If you want to close the gap
between the A and B positions and move the information that follows the B position to the A position, select
DELETE (WITH SHIFT.) by turning dial.
Edit Procedures require the use of A & B points. (see "Setting the A & B Points")
1. Press EDIT button and select DELETE.
DELETE LED lights up and ENTER and EXIT LED's start blinking. Display shows "Ab ALL".
Press ENTER
2. Select the track(s) to be deleted from "ALL" or "tr1" ... "tr6".
Display shows "ALL", "tr1" ..."tr6".
Press ENTER.
3. Display shows "ErASE" or "SHiFt".
Select erase or shift using Jog Dial.
4. Press ENTER button.
Display shows "donE".
5. Press EXIT to leave the DELETE mode.
You have now deleted the AUDIO non-destructively, meaning you can UNDO and everything will still be
there. If you want to permanently erase the audio , you must perform one further step.
1) Press MENU button. Turn dial to "Plylist". Press ENTER
Display shows "reduce". Press ENTER.
Display shows "sure". Press ENTER
Display shows "busy", then counts down. When it is finished, all of your edits are permanent. All audio is gone.
16