Vestax HDR-V8 Operational Manual page 27

LOCATE
8 auto location points, plus "A" and "B" , can be entered and recalled immediately.
Creating a locate point
While in PLAY or SHUTTLE, stop at the position where an auto location point
is required.
To Create Locate Point A or B :
Press ENTER button. Press A or B button. It is set.
To Create Locate Points 1-8:
Press ENTER. Press LOCATE button. Turn dial to select number 1-8.
Press LOCATE button again to store the location in one of 8 memory locations.
Recalling a locate point
To recall Locate point A or B, simply push button A or B. It is instant.
To recall Locate points 1-8, do the following:
Press LOCATE button. LOCATE LED and EXIT LED start blinking
Counter shows last locate number.
*If no locate number has been set, the counter shows "Loc.01".
*If a location has already been set, the counter shows the last active number.
Turn the Jog Dial to change to the required location number.
Press LOCATE button.
HDR goes to the selected locate position.