Vestax HDR-V8 Operational Manual page 19

Vestax HDR-V8 Continuous Controller Assignments
The CC assignments needed to control the internal mixer are listed in the following table.
Please assign each parameter of the MIDI or the Mixer Map on the sequence program to
control the parameter of the internal mixer.
0-7 (0-7 hex) Pre EQ level, Tracks 1-8 full scale
(2 byte controller accepted)
8-15 (08-0F) Track volumes 1-8
(2 byte controller accepted)
16-23 (l0-17) Pan, Tracks 1-8
24-26 (18-19) AUX send masters 1,2,3 full scale
30 (1C) Left Master volume
31 (1D) Right Master volume
32-39 (20-27) Optional LSB for pre eq level,tracks 1-8
40-47 (28-2F) Optional LSB for track volumes 1-8
48-55 (30-37) EQ 1 gain, tracks 1-8
56-63 (38-3F) EQ 3 gain, tracks 1-8
56-63 (38-3F) EQ 1 freq, tracks 1-8
64-71 (40-47) AUX send 3,tracks 1-8
72-79 (48-4F) EQ 2 gain, tracks 1-8
80-87 (SO-57) EQ 2 freq, tracks 1-8
88-95 (58-5F) EQ 2 type, tracks 1-8
96-103 (60-67) AUX send 1, tracks 1-8
104-111 (68-6F) AUX send 2, tracks 1-8
112-119 (70-77) mute, tracks 1-8
off, -57.5,-57.25,...+6.0dB
full scale off, -63 .5,-63.25,.. .0dB
14-114 left 100%, 98%,...Right 100%
off,-63.0,-62.5,...0dB
full scale off,-63.0,-62.5,...0dB
full scale off,-63.0,-62.5,...0dB
4-124 -12.0,-11.8,...+12.0dB
0dB=64
4-124 -12.0,-11.8,...,12.0dB
0dB = 64
12-120 50Hz,53Hz,...11.986KHz
full scale off`-63.00,-62.50,....0.00dB
4-124 same as eq1 gain
12-120 same as eq1 freq
0-65 same as eq1 type
full scale off,-63.0,62.5,...0dB
full scale off,-63.0,62.5,... 0dB
switch 0-63 unmuted, 64-127muted