Vestax HDR-V8 Operational Manual page 17

MERGE
To Merge tracks, follow the procedures below. Any # of tracks can be merged to 1 (mono)
or 2 (stereo) tracks. You can virtual and real tracks together simultaneously. (See Virtual Tracks)
1. Press UTILITY button and select MERGE.
MERGE LED lights and display shows "SurE".
2. Pressing the track buttons arm the destination tracks. Select up to 2 destination
track(s) to merge to .If only 1 track is selected, all the playback track will be mixed to
mono and merged to the destination track. If 2 tracks are selected, all the playback
tracks will be mixed in stereo according to panning settings and volumes and merged
to the destination tracks.
3. MUTE any tracks you don't want merged .
4. Press REC and PLAY. Tracks will play in real-time and merge to destination tracks.
Tech Tip:
To prevent ALL tracks from merging, MUTE any tracks you don't want to merge.
Always check your merge before erasing original tracks. Back-up your track's
in case you want to Reemerge later !
4. Hold REC button and press PLAY button to start merging.
5. Press STOP to stop merging, or let song go to end. It will stop.
6. Press EXIT to leave MERGE mode.
If only one track is selected as a destination track, "PAN" of each track is canceled
and all tracks are mixed to mono.
17