Beurer BM 55 Instructions For Use Manual page 8

• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting the hour format, date and time
This menu allows you to set the following functions, one after
another.
Hour format Date
➔
It is essential to set the date and time. Otherwise, you will not
be able to save your measured values correctly with a date and
time and access them again later.
If you press and hold the M1 or M2 memory button, you
can set the values more quickly.
•Press and hold the Start/stop button
•Choose the desired hour format with the
M1/M2 memory buttons and confirm with
the Start/stop button
The year flashes on the display.
•Choose the desired year with the M1/M2
memory buttons and confirm with the
Start/stop button
Time
➔
for 5 seconds.
.
.
The month flashes on the display.
•Choose the desired month with the M1/
M2 memory buttons and confirm with the
Start/stop button
The day flashes on the display.
•Choose the desired day with the M1/M2
memory buttons and confirm with the
Start/stop button
If the hour format is set as
play sequence is reversed.
The hour flashes on the display.
•Choose the desired hour with the M1/M2
memory buttons and confirm with the
Start/stop button
The minute flashes on the display.
•Choose the desired minute with the M1/
M2 memory buttons and confirm with the
Start/stop button
Operation with the mains part
You can also operate this device with a mains part.
When doing so, there must not be any batteries in the battery
compartment. The mains part can be obtained from specialist
retailers or from the service address using order number 071.95.
• To prevent possible damage to the device, the blood pres-
sure monitor must only be used with the mains part de-
scribed here.
8
.
.
, the day/month dis-
12h 12h
.
.