Warranty; Service Charge - SAESHIN Oz Instruction Manual

* Read all instructions before using. This
product has been designed for being used at
dental labs.
Thank you for purchasing our products.
Proper maintenance and repair brings long use
of the products.
Keep the instruction for use for your reference.
The manufacturer is not responsible for
accidents caused by an use not specified in the
instructions.
Product appearance or specification can be
subject to be changed without notice for the
improvement.
The users are responsible for the operation
and mainte nance of the products.
By providing the model name and breakage
condition, you will obtain a quick answer to
your question.

WARRANTY

Handpiece - 1 year
Contol box & pedal - 1 year
Warranty does no incluye misuse or normal
wear of bearing, carbon brush, collet chuck,
spindle and armature.
Other cases
- Faulty by natural causes ( f ire, sea wind or
water, flood etc.).
- Replacing by the normal wear of the
consumable parts (ball bearings, collet
chuck, spindle, armature, etc.).

SERVICE CHARGE

In case of the fault or malfunction from the
misuse of the user:
- Using with wrong input voltage.
- In case of user's misuse or improper use.
- Dropping down during setting or moving.
- Using consumable parts or accessories not
recommended by manufacturer.
- Malfunction after repairing at the places not
recommended by manufacturer.
* Design and specification of the product can
be subject to be changed for improving the
quallity.
PRODUCT SPECIFICATION
INPUT POWER
SOURCE
FUSE
WEIGHE
DIMENSIONS (mm)
MAXIMUM LOAD
CURRENT
NON LOAD RPM
OUTPUT
MAX. TORQUE
WEIGHT
DIMENSIONS
AC 220 ~ 230 V
50/60 Hz
2 A
2.5 kg
(W) 96
(D) 207
(H) 182
2 A
50000 RPM
230 W
7.8 N.cm
245 g
L L1 L2 D
174 78 93 27
D1
18