Table of Contents
Advertisement
Quick Links
This product requires assembly by an adult because of the small parts. Care should be
taken in unpacking and assembling this item to keep the small parts away from children.
WARNING
Young children can be seriously injured or killed, if furniture tips over.
Don't use this item for a TV stand.
Use angle-braces or anchors to secure furniture to the wall.
ASSEMBLY INSTRUCTIONS
X-FRAME BATH WALL SHELF-WHITE
X-FRAME BATH WALL SHELF-ESPRESSO
ADULT ASSEMBLY REQUIRED
- 1 -
Advertisement
Table of Contents
Related Manuals for RiverRidge X-FRAME BATH WALL SHELF-WHITE
Summary of Contents for RiverRidge X-FRAME BATH WALL SHELF-WHITE
- Page 1 ASSEMBLY INSTRUCTIONS X-FRAME BATH WALL SHELF-WHITE X-FRAME BATH WALL SHELF-ESPRESSO ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of the small parts. Care should be taken in unpacking and assembling this item to keep the small parts away from children.
- Page 2 THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 50 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS AND A TOTAL OF 50 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELF AND 50 POUNDS TOTAL WEIGHT THE SHELF MAY FALL FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
- Page 3 PARTS LIST PARTS DESCRIPTION TOP BOARD 2PCS SIDE FRAME BOTTOM BOARD BACK BOARD LEFT SIDE PANEL RIGHT SIDE PANEL BACK CROSS BAR FRONT CROSS BAR 4PCS WOOD DOWEL 8PCS LONG WOOD SCREW 5x45mm 12PCS WOOD SCREW 4x35mm 6PCS SMALL WOOD SCREW 3x12mm 3PCS HOOK 4PCS...
- Page 4 STEP 1 STEP 1 1. Put the top board (1) upside down on a soft padded surface. 2. Attach the back apron (7) to the top board (1) by inserting 3 wood screws (C) through the holes on the back apron (7) then tighten to the top board (1) by using a Philips screw driver. 3.
- Page 5 STEP 3 STEP 3 1. Attach another side frame (2) to the top board (1) by inserting 2 long wood screws (B) through the holes on the side frame (2) then tighten to the back cross bar (7) and front cross bar (8) by using the Allen wrench (I).
- Page 6 STEP 5 STEP 5 1. Attach 1 hook (E) to the back board (4) by inserting 2 small wood screws (D) through the holes on the hook (E) then tighten to the back board (4). 2. Repeat the above step to assemble the other 2 hooks (E). 3.
- Page 7 STEP 7 STEP 7 1. Press 4 plastic caps (F) into the wood screw holes on the 2 side frames (2). 2. If added pressure is needed to keep the plastic cap in place – cover the cap with a piece of paper and tap lightly with a hammer to secure the cap.
- Page 8 ENJOY YOUR NEW CABINET NOW ! Attention Adults: The cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct the hazard such as tightening of screws and taking any damaged parts away from children. Thank you for purchasing this item.
Need help?
Do you have a question about the X-FRAME BATH WALL SHELF-WHITE and is the answer not in the manual?
Questions and answers