Replacement Procedure - Keysight Technologies 16194A Operation And Service Manual

Service
Assembly Replacement
Table 4-3 Replaceable Parts for Test Stage (Continued)
Reference
Designator

Replacement Procedure

This section covers the disassembling and assembling procedure of the center
conductor assembly. See
Disassembling Procedure
1. Remove the center conductor assembly 7 from the test stage 5.
2. Clamp the contact of the APC-7
3. Loosen the contact D.
Assembling Procedure
1. Put thread sealant
2. Assemble the parts A, B, C, and D.
3. Set the angle of the contact assembly 7 as shown in
Figure 4-4 View Around the Electrode
26
Keysight Part
Number
D 16194-24001
noses.
1
to the screw part of the contact of the APC-7
1. Contact to a Keysight Technologies office for the part number of the thread sealant.
RoHS
Compliant
Qty
Replacement
Part Number
16194-24001 1
Table 4-3 for the reference designators.
® A using pliers which have rubber-covered
Keysight 16194A High Temperature Component Fixture
Description
Contact of the Electrode
®
A.
Figure 4-4.