Add 4-port capability upgrade kit to upgrade pna-x n5244b or n5245b option 219 to option 419 for analyzers with serial numbers prefixed my/sg/us5201 and above (48 pages)
.com. Description The 11853A 50 ohm Type-N Accessory kit contains the RF components required for measurement of devices with 50 ohm, type-N connectors, and for using a network analyzer with a type-N configuration. Each kit contains a type-N (female) short, a type-N (male) short, two type-N (male) barrels, two type-N (female) barrels, and a storage case.
There are no replaceable components for the components. A worn or damaged component must be replaced in whole. Equipment and Supplies The following equipment and supplies are required for the maintenance and use of, but are not supplied with, your 11853A accessories kit. Item Part Number Type-N gage set (part of the 85032F calibration kit) 85054-60059 Torque wrench, 3/4”, 136 N-cm (12 in-lb)
Need help?
Do you have a question about the 11853A and is the answer not in the manual?
Questions and answers