DK System DK LOGIC 100 Manual page 10

7.3 Example - programming the automatic operation mode (cont.)
5. Use the "-/+" buttons to set the hour to 6:00; and
the buttom
confirm by pressing
range Pn:U2 will appear on the screen, and
next the hour at which it should start.
6. Use the "-/+" buttons to set the hour to 9:00; and
the button
by pressing
Pn:U3 will appear on the screen, and next the
hour at which it should start.
7. Use the "-/+"buttons to set the hour to 16:00;
and the button
confirm by pressing
range Pn:U4 will appear on the screen, and
next the hour at which it should start.
10
Room thermostat DK LOGIC 100
to set the symbol
. A symbol of the next
t
to set the symbol
. A symbol of the next range
t
to set the symbol
. A symbol of the next
t
and
PROG
PROG
PROG
and confirm
PROG
PROG
PROG
and
PROG
PROG
PROG