Advertisement
Quick Links
Marsden VS 250E
Veterinary Scales
Manufacturer's Declaration of Conformity
This product has been manufactured in accordance with the
harmonised European standards, following the provisions of the
below stated directives:
Electro Magnetic Compatibility Directive 89/336/EEC
Low Voltage Directive 73/23/EEC
MARSDEN Equipment Co. Ltd..
.
MANUAL
IN-8276 80001D
Advertisement
Related Manuals for marsden VS 250E
Summary of Contents for marsden VS 250E
- Page 1 Marsden VS 250E Veterinary Scales Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonised European standards, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 89/336/EEC Low Voltage Directive 73/23/EEC MARSDEN Equipment Co. Ltd..
- Page 2 DISPLAY AND KEY FUNCTION By pressing the HOLD key again, this function can be repeated as often as desired. UNIT : Select the units of kg, lb TARE: 1) When there’s load on the scale, press this key to return to zero. 2) Put a container on the scale, press this key to tare the weight, and the tarred value is stored.
- Page 3 ERROR MESSAGES AC adaptor Low Battery The scale uses battery (1.5v x 6) or 9V100mA DC adapter. If battery is discharged, the display will show. The operator should start to recharge the battery. Overload If the total load exceeds the maximum capacity of scale, the display will show the “Err”...
Need help?
Do you have a question about the VS 250E and is the answer not in the manual?
Questions and answers
When scales switched on it count downs to zero but then switches off
The Marsden VS 250E scale counts down to zero and then switches off if the zero count is either above or below the set range. If the zero count is too high, it shows an “Err” message; if it's too low, it shows an “Errl” message. In both cases, if the error continues for 30 seconds, the scale turns off automatically.
This answer is automatically generated