Related Manuals for marsden VT-250
Summary of Contents for marsden VT-250
- Page 1 USER MANUAL VT-250 Please take time to read these instructions before starting to use the scale Version 1.0 05/22...
- Page 2 Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonized European standards, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 2014/30/EU Low Voltage Directive 2014/35/EU Marsden Weighing Machine Group Ltd. Page 2...
- Page 3 6x AA batteries 9v DC adaptor Dimensions 1160mm x 550mm x 830mm Warranty One year Weight of Scale 35kg Please note: Marsden’s policy is one of continuous development and therefore we reserve the right to change product specification without notice. Page 3...
- Page 4 If any inaccuracies occur, please contact your local dealer or service partner. • You can book an accuracy check with the Marsden Service team on 01709 364296. Disposing of the Scale • This product should not be treated as regular household waste, but should be handed in to an electrical/electronic equipment recycling centre.
- Page 5 • The scale can be used in a fixed location or as a portable scale, powered by either the DC adaptor or with 6x 1.5 v AA batteries. • If you require any assistance with using the VT-250, call the Marsden team on 01709 364296, quoting model number VT-250 and the serial number, which can typically be found on the underside of the scale.
- Page 6 • To switch the VT-250 on, press ON/OFF. • Once the scale shows a line of zeros, it is ready to use. • To switch the VT-250 off, with the scale switched on press ON/OFF. Using the Hold function • The Hold function allows you obtain an accurate weight reading, even if the animal is moving on the scale.
- Page 7 Error Messages Display Problem Solution Low battery Replace the 6x AA batteries or connect the DC adaptor If zero count is higher than Over Zero the setting range, the display will show this message. If zero count is below the Under Zero setting range, the display will show this message.
- Page 8 Tel: 01709 364296 / 0800 169 2775 Fax: 01709 364293 E-mail: sales@marsdengroup.co.uk Manufacturing and Distribution: Unit 7, Centurion Business Park, Coggin Mill Way, Rotherham, S60 1FB Head Office: Unit 1, Genesis Business Park, Sheffield Road, Rotherham S60 1DX www.marsden-weighing.co.uk IN-0943 6044L REV 03/2017...
Need help?
Do you have a question about the VT-250 and is the answer not in the manual?
Questions and answers