Subscribe to Our Youtube Channel
Related Manuals for marsden V-20
Summary of Contents for marsden V-20
-
Page 1: User Manual
USER MANUAL V-20 Please take time to read these instructions before starting to use the scale Version 1.1 02/17... -
Page 2: Table Of Contents
Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonized European standards, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 2014/30/EU Low Voltage Directive 2014/35/EU Marsden Weighing Machine Group Ltd. Page 2... -
Page 3: Product Specification
With handles: 620mm x 350mm x 50mm Platform only: 500mm x 350mm x 50mm Please note: Marsden’s policy is one of continuous development and therefore we reserve the right to change product specification without notice. Images in this manual are for illustration purposes only. -
Page 4: Safety Instructions
If any inaccuracies occur, please contact your local dealer or service partner. You can book an accuracy check with the Marsden Service team on 01709 364296. Disposing of the Scale This product should not be treated as regular household waste, but should be handed in to an electrical/electronic equipment recycling centre. -
Page 5: Before Using The Scale
The scale can be used in a fixed location or as a portable scale, powered by either the DC adaptor or with a 9V battery. If you require any assistance with using the V-20, call the Marsden team on 01709 364296, quoting model number V-20 and the serial number, which can typically be found on the underside of the scale. -
Page 6: Using The Hold Function
To switch the V-20 on, press TARE/ON/OFF. Once the scale shows a line of zeros, it is ready to use. To switch the V-20 off, press and hold TARE/ON/OFF for three seconds. Using the Hold function The Hold function allows you obtain an accurate weight reading, even if the animal is moving on the scale. -
Page 7: Error Messages
Error Messages Display Problem Solution Low battery Replace the 9V battery is connect the DC adaptor If zero count is higher than Over Zero the setting range, the display will show this message. The scale will turn off in 30 seconds if the status continues. - Page 8 Tel: 01709 364296 / 0800 169 2775 Fax: 01709 364293 E-mail: sales@marsdengroup.co.uk Manufacturing and Distribution: Unit 7, Centurion Business Park, Coggin Mill Way, Rotherham, S60 1FB Head Office: Unit 1, Genesis Business Park, Sheffield Road, Rotherham S60 1DX www.marsden-weighing.co.uk IN-0806 3022G REV 01/2017...
Need help?
Do you have a question about the V-20 and is the answer not in the manual?
Questions and answers
What does this symbol mean ?
The symbol (an arrow at the bottom left of the display) on the Marsden V-20 indicates that the Hold function is active. It flashes briefly and then remains on the screen to show that an accurate weight is being held.
This answer is automatically generated