SonicWALL SMA 210 Deployment Manual page 22

• Enable Anti-Spyware Service
8 Click OK.
9 In the Edit Interface window again, enter the IP address for this interface in the IP Address field.
For example:
Scenario A
Scenario C
10 Enter your Subnet Mask.
11 Optionally enter the Default Gateway, which is the WAN address of the gateway appliance.
12 If you want to allow management of the gateway appliance over this interface, select the desired
management options.
13 If you want to allow users to log in to the gateway appliance using this interface, select the desired user
login options.
14 Click OK to apply changes.
Use an IP address in the default SMA X0 subnet (default 192.168.200.x)
Use an IP address in the gateway LAN subnet (default 192.168.168.x)
SMA 210/410 Deployment Guide
Additional Configuration
22