SonicWALL SMA 210 Deployment Manual page 16

6 In the Add Object dialog box, create an address object for the NetExtender range, using the following
options:
Name
Zone Assignment
Type
Starting IP Address
Ending IP Address
7 Click Add to create the object. Once added, click Close.
8 On the Network > Address Objects page, click the Address Group tab.
9 Click Add Group.
10 In the Add Address Object Group dialog box, create a group for the X0 interface IP address of your SMA
and the NetExtender IP range:
• Enter a name for the group.
• In the left column, select the two address objects you created and click the right arrow button.
• Click OK to create the group when both objects are in the right column.
11 Navigate to the Firewall > Access Rules page, and select the Matrix view style.
12 Click the SMA > LAN icon.
13 On the page that displays for SMA to LAN, click Add.
14 In the Add Rule window, create a rule to allow access to the LAN for the address group you just created:
From
To
Source Port
Service
Source
Destination
Users Allowed
Users Excluded
Schedule
Select the following
check box(es)
15 Click OK to create the rule.
This completes Scenario C.
Name for NetExtender
SMA
Range
Start of the NetExtender IP address range (default 192.168.200.100)
End of the NetExtender IP address range (default 192.168.200.200)
SMA
LAN
Any
Any
The address group you just created, such as SMA to LAN.
Any
All
None
Always on
Enable Logging
Allow Fragmented Packets
SMA 210/410 Deployment Guide
Deploying SMA on the LAN
16