Assembly - Vetter SmartFork Operating Instructions Manual

3

Assembly

Assembly of Note the document "U163-599 Replacement of the LED band" in
the LED band cable documents" on page 8 with regard to replacing the LED bands.
Assembly of
the control
device
Fig. 2: VETTER SmartFork
V.09/2019
®
Flash
NOTICE!
Install the control device in a protected position (e.g. on the fork carriage).
Refer to manual U163-907 (SmartFork
tions.
®
SmartFork Flash control device
Ä Chapter 2.3 "Appli-
®
) for cable installation instruc-
Assembly
9