Vetter SmartFork Operating Instructions Manual page 3

About this This operating manual contains basic information that is to be observed during the
manual
assembly, operation and configuration of the VETTER SmartFork
(also referred to as driver). For this reason, it is imperative to read this manual before any
work on or with the control device and ensure that it is always available at the operation
site.
Illustrations in this manual are for basic understanding and may deviate from the actual
design.
Customer
Address
service
Phone
Email
Internet
V.09/2019
VETTER Industrie GmbH
Carl-Benz-Strasse 45
57299 Burbach
GERMANY
+49 2736 4961-964
support@smartfork.com
www.smartfork.com
www.forks.com
®
SmartFork Flash control device
Supplemental directives
® Flash control device
3