Configuration - Vetter SmartFork Operating Instructions Manual

Settings
Configuration by means of PC > Configuration
4.3.2

Configuration

Fig. 7: Configuration screen
On the Configuration screen, the parameters for the various
light patterns are set in the three sections "Safety", "Insertion depth" and "Marker".
n The "Safety" field relates both to the parking light and the chasing light.
Refer to chapter "Switches and buttons" in relation to selecting the function used
n
Ä Chapter 4.1 "Settings via switches and buttons" on page 10.
n Position information in number of LEDs is always based on the distance from the arm
tip.
1.
2.
3.
16
There can be a shift in perspective due to the position of the driver. Com-
pensate by adapting/shifting the relevant marker.
Make settings on the screen.
Press the "Upload" button.
ð Settings are transferred to the control device and stored in the volatile part of
the control system.
Press the "Save" button to save data permanently.
The "Download" button can be used to download the current set-
tings for the control system.
SmartFork
®
Flash control device V.09/2019