Advanced Setup; Editing Button Labels - Universal Remote Control Customizer URC-300 Owner's Manual

Advanced Setup

After you've finished all your basic setup, you can
choose to make operation easier by customizing the
Customizer just the way you want, using the Advanced
Setup features described in this section.

Editing Button Labels

You can change the name of any of the display buttons
(including Favorite Channels) by following these steps:
Press and hold both the MAIN and ENT (Enter)
1
buttons for approximately three seconds. The top
of the display will show "SETUP". You are in
SETUP mode now.
Note: You have 30 seconds to perform a step while you are
in SETUP mode. If you don't press a button within that time,
the Customizer will time out and return to normal operation.
2
Press the EDIT button.
EDIT
Button
The display changes to the EDIT menu. Press the
3
TEXT button.
TEXT
Button
U R C - 3 0 0
17