Download Print this page
Universal Remote Control PHAZR -5 UR5U-9000L Operating Instructions

Universal Remote Control PHAZR -5 UR5U-9000L Operating Instructions

Universal remote control cable remote control operating instructions

Advertisement

Quick Links

1
4
Operating Instructions For
Introduction
Button Functions
PHAZR-5
The PHAZR-5 UR5U-9000L & UR5U-9020L
is designed to operate the CISCO / SA,
Pioneer, Pace Micro, Samsung and
Motorola digital set tops, Plus the majority
Cable Remote Control
of TV, AUD, DVD and AUX equipment on
the market as shown below.
CABLE : Cable Converters
TV : Televisions
UR5U-9000L & UR5U-9020L
AUD : Audio Receivers
DVD : DVD Players
AUX : Media PC, Gaming System, etc.
2
Replacing Batteries
Before you program or operate the remote control,
you must install two new AA alkaline batteries.
STEP1 Remove the battery compartment cover
on the back of your remote control.
STEP2 Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
STEP3 Replace the battery compartment cover.
3
Operations
5
Programming the Remote Control
DEFAULT STATE:
There are three ways you can program your remote:
Component Default: CABLE Set Top Box (STB)
* Quick Set-Up Method
Channel Default: CABLE channel and numbers
* The Pre-Programmed 3-Digit Code Method
through the CABLE STB. You have the option of
* The Auto-Search Method
controlling your CABLE channel and numbers
The Quick Set-Up Method is a unique new feature that enables the fastest and easiest set-up by
through the TV or AUD. Refer to section G for pro-
using one-digit codes for up to 10 major brands for each component.
gramming steps.
The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit code num-
Volume Default: Volume and Mute control are
automatically transferred to the respective
bers that correspond to a particular Component's manufacturer/brand, so it's the fastest and easiest of the two
Component mode you select, as follows: CBL:
methods. (Code Tables are on the backside of this Instruction Sheet.) The Auto-Search Method scans through
all the codes in the remote control, one at a time.
Cable Set Top Box / TV: TV / AUD:AUD. Volume
and Mute control for DVD are automatically
IMPORTANT SETUP NOTE!
Universal Remote Control, Inc.
transferred to the TV. However, you have the
This pertains to all programming steps. When you are in setup mode, a component LED will light for 30 sec-
option of controlling CABLE Volume and Mute
www.universalremote.com
onds.If you do not press a button within 30 seconds, the LED light will turn off and exit setup mode and you will
through the TV, DVD or AUD. Refer to section H
OCE-0081A Rev 01 (12/09/09)
need to start over.
for programming steps.
A. Quick Set-Up Method
C. Auto-Search Method
E. AUX Function: Programming a 5
Component
STEP1 Turn on the device you want to program-
STEP1 Turn on the Component you want to
to program your TV, turn the TV on.
program (TV, AUD, DVD or AUX).
You can take advantage of the AUX func-
STEP2 Point the remote at the TV and press
tion to program a 5
STEP2 Press the [COMPONENT] button (TV,
and hold TV key for 3 seconds. While
second TV, AUD, DVD or Audio Component.
AUD, DVD or AUX) to be programmed
Holding the TV key, the TV LED will light
STEP1
Turn on the 5
and [OK/SEL] button simultaneously
off and on again. Begin to press the
to program (TV, AUD, DVD or Audio).
for 3 seconds. The Component LED
number keys, one at a time, starting
light will turn on for 30 seconds indi-
with 1, then 2, 3...0 until the TV turns off.
STEP2
Press the [AUX] button and the
cating the unit is ready to be pro-
[OK/SEL] button simultaneously for
STEP3 Release the TV key to save the code.
grammed.
3 seconds.The [AUX] Component
The TV LED will blink twice to con-
firm the code is stored.
LED will turn on for 30 seconds.
STEP3 Point the remote toward the
Repeat these steps for your AUD, DVD,
Component and press the [CH ] or
STEP3
Press the [COMPONENT] button
AUX, etc.
you want to setup. Point the remote
[CH ] button one step at a time or
control toward the Component and
keep it pressed. The remote will emit
B. Pre-Programmed 3-Digit Code Method
enter the 3-digit code number
a series of ON/OFF commands.
assigned to your brand.
STEP1 Turn on the Component you want to
Release the [CH ] or [CH ] button
program (TV, AUD, DVD or AUX).
as soon as the Component turns Off.
*Note : If the 3-digit code number you just
STEP2 Press the [COMPONENT] button (TV,
entered is the correct number, the
STEP4 Test functions. (Same as for 3-Digit
AUD, DVD or AUX) to be pro-
Component will turn Off. If it did
Code Programming Method -
not turn Off, continue entering
grammed and [OK/SEL] button simul-
Section B). If any of the functions do
code numbers listed for that brand
taneously for 3 seconds. The
not work as they should, repeat from
until the Component turns Off.
Component LED light will turn on for
STEP 3 using [CH ] or [CH ] but-
30 seconds indicating the unit is
tons to find the correct code.
STEP4
Test functions. (Same as for 3-
ready to be programmed.
Digit Code Programming Method -
STEP5
Save the code. (Same as for 3-
STEP3 Point the remote control toward the
Section B). If any of the functions
Digit Code Programming Method
Component and enter the 3-digit
do not work as they should, you
- Section B).
code number assigned to your brand.
need to find a new code.
*Note : If the 3-digit code number you just
Now, repeat the Auto-Search Method for
Once you have found the correct
STEP5
entered is correct, the Component will
those Components you could not program
3-digit code, save it by pressing the
turn Off. If it did not turn Off, continue
earlier with the Pre-Programmed Method.
[AUX] button one more time. The
entering code numbers listed for that
Component LED light will blink
brand until the Component turns Off.
D. Finding a Component Button's
twice to confirm the code was
Setup Code Number
stored. Now when you press the
STEP4 After you've entered the correct code
AUX button, all the buttons will
number and the Component has
If you used the Auto-Search Method to pro-
work with that 5
turned Off, press the [POWER] button
gram a Component, you may not know
to turn the Component back On. Now
what the correct code number is. Here is a
F. Programming the System On/Off Button
it is time to test the VOLUME and
way for you to identify the code number, so
MUTE buttons for the TV (or PLAY and
you can record it for future reference.
This allows you to program the System
STOP buttons for DVD) to make sure
On/Off button so it can send up to five power
they all work. If any of the functions do
STEP1
Press the [COMPONENT] button
On/Off commands with one button press.
not work as they should, repeat from
(TV, AUD, DVD or AUX) you want
Press the [CBL] button.
STEP 3 using the next 3-digit code
to verify and the [OK/SEL] button
STEP1
number listed for that brand until you
simultaneously for 3 seconds. The
Press the [SYSTEM ON/OFF] but-
STEP2
find the best Component code.
Component LED light will turn on
ton and the [OK/SEL] button simul-
STEP5 Once you have found the correct 3-
for 30 seconds.
taneously for 3 seconds. The [CBL]
digit code, save it by pressing the
button will turn on for 30 seconds.
STEP2
Press the [INFO] button and count
same [COMPONENT] button one
the number of times the Component
STEP3
Press the first [COMPONENT] button
more time. The Component LED light
LED light blinks. This number indi-
you want to store in the [SYSTEM
will blink twice to confirm that the
ON/OFF] button and then the
cates the first digit of the code, fol-
code was successfully stored.
[POWER] button. Repeat this for other
lowed by the second and third,
Now, program the rest of your Components
Components until you have stored all
each separated by a one second
the desired power commands into
by repeating STEPS 1-5.
pause when the LED will turn off.
the [SYSTEM ON/OFF] button.
*Note : If the Pre-Programmed Method did
*Note :10 blinks represents the number zero.
not work, or if the Code Tables do
Press the [CH ] button to save the
STEP4
Example : One blink, (pause), eight blinks,
not list your Component brand, use
power commands you stored. The
(pause) and three blinks, indi-
the Auto-Search Method as explained
[CBL] button will blink twice to con-
cates code number 183.
in Section C.
firm the commands have been saved.
th
G. Programming Channel Control
If your remote model has custom-program-
mable Macro buttons available, they can be
You can program the channel controls
programmed to act as a 'Macro' or Favorite
(Channel Up, Channel Down, Last and
Channel button in CABLE mode. This allows
th
Component such as a
Numbers) from one Component to operate
you to program up to five 2-digit channels,
in another Component mode. Default chan-
four 3-digit channels or three 4-digit channels
nel control settings on the remote control
th
Component you want
that can be accessed with one button press.
are as follows:
Press the [CBL] button to select the
STEP1
CBL : CBL
T V : CBL AUD : AUD
CBL mode.
DVD : DVD
AUX : AUX
STEP2
Press the [MACRO] button and
If you wish to store the TV channel control
[OK/SEL] button simultaneously for 3
in TV mode, use the following steps.
seconds. The [CBL] button will turn
on for 30 seconds.
STEP1
Press the [TV] button and the
[OK/SEL] button simultaneously for
STEP3
Enter the the 2, 3 or 4-digit code for
3 seconds. The [TV] Component
the channel you want programmed
LED will turn on for 30 seconds.
first (for example, 007) using the
Press the [VOL ] button.
Number Pad, then press the [STOP]
STEP2
button. Then enter the code for the
STEP3
Press the [TV] button again.
next channel (for example, 050), then
The Component LED will blink
press the [STOP] button. Repeat this
twice to confirm the programming.
process for the third channel. The
[CBL] button will blink once for each
To return to original state:
channel entered.
If you wish to restore the CABLE channel
control in TV mode, repeat the above steps
STEP4
Press the [CH ] button to store the
channels that were selected. The
but press [CBL] in STEP3 .
[CBL] button will blink twice to con-
H. Programming Volume Control
firm the storage of commands.
Volume and Mute control are factory-pro-
To access the programmed channels, press
grammed to automatically transfer to the
the [MACRO] button once. This will bring up
respective Component mode you select, as
the first channel. Press once again and it will
follows:
bring up the second channel. Press again and
it will bring up the third channel.
CBL :CBL
T V : TV
AUD : AUD
DVD :TV
AUX : AUX
J. Low Battery Warning
th
Component.
However, you can program the volume
When the batteries are low and need to be
controls (Volume Up, Volume Down and
replaced with fresh batteries, the Component
Mute) from one Component to operate in
LED lights will blink 2 times in sequence
another Component.
whenever a [POWER] button is pressed to
If you wish to store the TV volume control in
turn on equipment.
CBL mode, use the following steps.
K. Memory Lock System
STEP1
Press the [CBL] button and the
[OK/SEL] button simultaneously for
This remote control is designed to retain pro-
3 seconds. The [CBL] Component
grammed memory for 10 years even after bat-
LED will turn on for 30 seconds.
teries are removed from the remote control.
STEP2
Press the [VOL ] button.
L. Record Your Component Set-up
STEP3
Press the [TV] button. The Component
Codes
LED will blink twice to confirm the pro-
TV
Set-up Code Number:
gramming.
AUD Set-up Code Number:
To return to original state:
If you wish to restore the CBL volume con-
DVD Set-up Code Number:
trol in CBL mode, repeat the above steps
AUX Set-up Code Number:
but press [CBL] in STEP3 .
For additional information about your remote
I. Programming a 'Macro' button.
control, go to www.universalremote.com
6
7
TV
Quick Set-up Code Tables
Set-up Code Tables
Manufacturer/Brand
TV
CBL-CABLE Converters
BRADFORD
Quick Number
Manufacturer/Brand
BROCKWOOD
Manufacturer/Brand
Set-Up Code Number
BROKSONIC
0
FUJITSU
CISCO / SA
001 003 041 042 045 046
BYDESIGN
1
SONY
PIONEER
001 103 034 051 063 076 105
CANDLE
2
SAMSUNG
PACE
001 005 002
CAPEHART
SAMSUNG
001 030
3
LG
CARY AUDIO DESIGN 266
MOTOROLA
002 111 148
4
TOSHIBA
CELEBRITY
DIGEO
153
5
PANASONIC
CENTURION
GENERAL INSTRUMENT 005 103 104
CETRONIC
6
PHILIPS
HAMLIN
049 050 055
CHANGHONG
7
HITACHI
HITACHI
103 055
CITIZEN
8
SHARP
JERROLD
005 004 103 005 003 008 009 010 069
CLARION
MAGNAVOX
010 012
9
PHILIPS
CLASSIC
MEMOREX
052
CLP CLASSIC
MOXI
111 252 153
COLORTYME
NFUSION
192
AUDIO
CONCERTO
PANASONIC
044 047
CONCIERGE
Quick Number
Manufacturer/Brand
PHILIPS
006 012 013 020 085
CONTEC
0
ROTEL
PULSAR
052
CORNEA
RCA
047
1
DENON
CORONADO
REGAL
049 050
2
YAMAHA
CRAIG
REGENCY
057
3
MARANTZ
CROSLEY
SKY
230 204
4
SONY
CROWN
SONY
108
CURTIS MATHES
5
INTEGRA
SPRUCER
047
CXC
6
HARMAN KARDON
TELNET
354
CYBERHOME
7
PIONEER
TOCOM
039 040 056
DAEWOO
TOSHIBA
052
8
ONKYO
VIEWSTAR
012 015
9
LEXICON
DAYTRON
ZENITH
052 060 093 100
DELL
DIGITAL PROJECTION 570
TV
DVD
DIMENSIA
Manufacturer/Brand
Set-Up Code Number
DREAMVISION
Quick Number
Manufacturer/Brand
DUKANE
A MARK
112 143
0
HITACHI
DUMONT
ABEX
025
1
SONY
DURABRAND
ACCURIAN
036
2
PHILIPS
DWIN
ADMIRAL
072 251 333
3
SAMSUNG
DYNASTY
ADVENT
247 388
4
PHILIPS MAGNAVOX
DYNEX
ADVENTURA
002
EIKI
5
PANASONIC
AIKO
103
ELECTROBAND
AKAI
116 146 248 404 405 473 475 323 387
6
LG
ELECTROGRAPH
391
7
JVC
ALBATRON
017
ELECTROHOME
8
DENON
ELEKTRA
ALERON
028
9
PIONEER
ELEMENT
AMERICA ACTION 043
AMPRO
073
EMERSON
AMSTRAD
052
AUX
ENVISION
ANAM
043 054 056 080 112
AOC
116 363 112 058
EPSON
Quick Number
Manufacturer/Brand
ESA
APEX
572
0
BOSE
FISHER
APEX DIGITAL
006
1
HP
AQUAVISION
573 574
FUJITSU
2
APPLE / iPod
FUNAI
ASTAR
477
3
APPLE / iPod
AUDIOVOX
076 454 388
FUTURETECH
AVENTURA
052
GATEWAY
4
MICROSOFT / XBOX
GE
AVION
441
5
SONY / PS2
AXION
039
6
LUTRON
BELCOR
116
GEM
7
X-10
GIBRALTER
BELL&HOWELL
333 072
8
X-10
BENQ
423
GO VIDEO
9
MICROSOFT / XBOX
BOXLIGHT
266
GOLDSTAR
Set-Up Code Number
043
116
238
031 032
116 002 003 363
058
001
116
043
247
116 002 003 363 043 258 103 143
043
043
333
116
363
073
043 050 051
116
143
043 054
164
043 143
116 258 363 143
043
015
363 016 043 044 076 103 114 125 127
143
363 143
320 164 363
333
235
011 025
116 073
096 052
257
043
400
187
001
466
143 024 076 196
072
363 494 526
028 048 043 155 005 116 363 047 050
051 076 096 143 153 154 052 514
116
324 590
323
007 057
246 198 410
028 043 052
043
242 268
073 116 008 009 034 056 074 155 333
363
391
116 073
026
113 116 102 363 106 112 127 143

Advertisement

loading

Summary of Contents for Universal Remote Control PHAZR -5 UR5U-9000L

  • Page 1 Mute control for DVD are automatically IMPORTANT SETUP NOTE! Universal Remote Control, Inc. transferred to the TV. However, you have the This pertains to all programming steps. When you are in setup mode, a component LED will light for 30 sec- option of controlling CABLE Volume and Mute www.universalremote.com...
  • Page 2 TV-LCD & Plasma TVs Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Manufacturer/Brand GRUNPY 028 043 MONIVISION SHENG CHIA ACCURIAN HAIER 363 501 MONTGOMERY WARD 333 072 SHERWOOD ADVENT MOTOROLA AKAI HALL MARK SHOGUN HANNSPREE 349 381 116 363 258 SIGNATURE HARLEY DAVIDSON 028...

This manual is also suitable for:

Phazr -5 ur5u-9020l_Phazr-5 ur5u-9000lPhazr-5 ur5u-9020l