Setting Up; Section 1: Pre-Programmed Code Method - Universal Remote Control Universl Remote Owner's Manual

Setting Up Your GAMER
There are three ways you can program your remote to work with
your A/V Components:
• The Pre-Programmed Code Method (page 8)
• The Auto-Search Method (page 12)
• The Learning Method (page 14)
The Pre-Programmed Code Method allows you to set up all the
buttons at once, so it's the fastest and easiest of the three methods.
The Auto-Search Method scans through all the codes in the remote
control, one at a time. The Learning Method allows you to transfer
functions from your old remote to Gamer, one button at a time.
* * * * *

SECTION 1: Pre-Programmed Code Method

STEP 1: The pre-programmed 3-digit codes are found in the back
of this Instruction Manual (starting on page 34). The codes are listed
by component category (i.e., TV, VCR, DVD, etc.), then by brand
name. For instance, if you would like to locate a code for a Sony
TV, first locate the TV category, and then look for the Sony brand.
8