Universal Remote Control Unifier URC-100 Owner's Manual page 22

Erasing All Learned Commands in One Device
Press and hold both the Device button where the
1
command is stored and the SELECT button for three
seconds.
Note: You have 30 seconds for each step, otherwise the
Unifier will time out automatically.
The Unifier display changes to:
Press and hold both the DEVICE button you'd like to
2
erase and the PAUSE button until the display flashes
ERASE nine times, followed by CLEAR, then release
the buttons and the Unifier returns to normal
operating mode.
T h e U n i f i e r
LEARN
20
Device
Buttons
SELECT
Button
DEVICE
Buttons
PAUSE
Button