Learning Method - Universal Remote Control Unifier URC-100 Owner's Manual

Learning Method

The Unifier can learn commands from your old remote
controls one-button-at-a-time by following these simple
steps:
Line-up the Unifier with your old remote control,
1
head-to-head, one or two inches apart.
Press and hold both the desired DEVICE button
2
and the SELECT button for approximately three
seconds. The top of the display will show
"LEARN". You are in LEARN mode now.
Note: You have 30 seconds to perform a step while you are
in LEARN mode. If you don't press a button within that time,
the Unifier will time out and return to normal operation.
T h e U n i f i e r
8
DEVICE
Buttons
SELECT
Button