Maintenance Work - Weber CF 3 Operating And Maintenance Manual

Maintenance work

Change engine oil
Remove the oil dip stick (1).
Remove the oil drain screw (2) and drain oil.
Only drain engine oil when at operating temperature.
After emptying completely, put in the locking screw (1). Fill
with oil in accordance with specifications.
Danger of scalding due to hot oil.
When working in the area of the engine compartment
there is danger of burn injury!
If lubricating oils and fuel come into contact with skin, they
can cause skin cancer. Upon contact with the skin, clean
affected skin with suitable cleaning agent without delay.
Change engine oil filter
Completely drain the engine oil as previously described.
Remove the cover cap (1).
Replace oil filter (1) with a new element.
After replacing the filter element seal the filter enclosure with
the cover cap.
CF 3 L
1
1
1
1
1
2
17