Maintenance Work - Weber CF 3/60 Hd Operating And Maintenance Manual

Maintenance work

Change the engine oil
Remove the oil dip stick (1).
Remove the oil drain screw (2) and drain oil.
Only drain engine oil when at operating temperature.
After emptying completely, put in the oil drain plug / locking
screw (2). Top up oil as specified.
Risk of scalding due to hot oil.
When working in the area of the engine compartment
there is a danger of being burnt!
If lubricating oils and fuel come into contact with skin, they
can cause skin cancer. Upon contact with the skin, clean
affected skin with suitable cleaning agent without delay.
Dispose of oils, greases, cloths soaked in oil, and
replaced parts with oil on them in an environmentally
friendly manner.
Clean / change air filter cartridge
Unscrew the air filter cover (1).
Remove the air filter insert (1) from the air filter enclosure.
Clean air filter insert as specified by the engine manufacturer
if there is damage or if it is extremely dirty.
16
1
2
1
1
CF 3-II Hd