Starting - Weber CF 3 Operating And Maintenance Manual

Mounting the water sprinkling system
Place the water tank into the protective frame.
Push down on the star-knob screw and mount the water tank
in the protective frame.
Lock the tank into place on the protective frame by relea-
sing the star-knob screw.
Completely empty the water tank if there might be a frost.

Starting

Bring the gas lever (1) into full-throttle position.
Slowly tighten the handle (1) of the reversing starter (2) until
resistance is noticeable.
Allow the handle (1) to glide back into the initial position, and
then forcefully and completely pull it through with both hands.
If ambient temperatures are below minus 5 degrees
Celsius comply with the instructions in the operating
manual provided by the engine manufacturer.
14
1
1
1
2
CF 3 L