Table of Contents
Advertisement
DLP-G653 Remove the Fiber Module
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1
Complete the
Step 2
Complete the
Step 3
Complete the
Stop. You have completed this procedure.
DLP-G653 Remove the Fiber Module
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1
Loosen the screws on the fiber module present on the right side of the ONS 15454 M6 assembly. (See the
following figure.)
Step 2
Loosen the screw present on the air filter locking feature of the ONS 15454 M6 shelf.
Step 3
Remove the air filter locking feature by holding the air filter and gently pulling the air filter locking feature
away from the shelf.
Step 4
Extract the fiber module by gently removing it from the ONS 15454 M6 shelf.
Installing the ONS 15454 M6 Shelf
122
As needed
Onsite
None
DLP-G653 Remove the Fiber Module, on page
DLP-G654 Install the Cable Module, on page
DLP-G655 Route and Lock Cables, on page 124
This procedure removes the default fiber module in the ONS 15454 M6 system.
#1 Phillips cross-head PH screwdriver
None
As needed
Onsite
None
Installing the ONS 15454 M6 Shelf
122.
123.
.
Advertisement
Table of Contents
