Dell EMC Virtual Edge Platform 1405 Series Operating System Installation Manual page 5

Figure 1. VEP1405 series front view
1. Security lock port
2. USB port
3. System status indicator LED
Table 4. Front view system status indicator LED
Color
Red
White
Green
Blue
Figure 2. VEP1405 series rear view (with port cover)
1. Port cover
2. Reset button
NOTE: See the Reset button behavior
3. LED status lights for SFP+ ports
4. SFP+ ports
5. Ethernet ports and LED status lights
6. Power connection port
NOTE: To prevent the VEP1405 series system console port from being accessed in a nonsecure location, the system
ships from the factory with a plate covering the micro USB port. To uncover the port, use a #0 (2.5 mm) Phillips head
screwdriver to loosen or remove the screw that holds the plate in place.
Status
Power on
System is booting
Operating system boots up with diagOS
Reset button is pressed for more than five seconds
NOTE:
more information.
table below for more information.
See the Reset button behavior table below for
Introduction 5