Owner's Information; Assemble Your Tractor; Contents Of Shipping Carton; You Will Need These Tools - Scotts Turf Master C4013-050 Owner's Manual

OWNER'S INFORMATION
Record the following information about your unit so that you will be able to provide it in case of loss or theft.
MODEL NUMBER:
DODO -DODO
(Enter complete 8 digit number from model plate on unit)
PURCHASE DATE: -
I - I -
CODE NO.: - - - - SERIAL NO.: - - - - - -
DEALER'S NAME AND ADDRESS: - - - - - - - - - - - - - - - - - - - - -
CITY: STATE: - - - - - - TELEPHONE: - - - - - - -
A
DANGER
This tractor can be dangerous if usedcarelessly. Read the Owner's Manual thoroughly before operating
the tractor. Always wear safety glasses or eye shields while assembling or operating the tractor. Do Not
carry passengers at any time. Keep hands, feet, hair and loose clothing away from the discharge area,
underside of the mower deck or any moving parts while the engine is running. Do Not allow children or
young teenagers to operate or be near the tractor while it is operating. Reduce engine to idle when
tractor is not moving. If tractor is to remain stopped for more than 2 minutes, stop the engine.
ASSEMBLE YOUR TRACTOR
NOTE
References to the right side and left side of this
tractor are as you are seated in the operator's
seat, facing forward.
CONTENTS OF SHIPPING CARTON
1 - Tractor (with 40 inch Mower Deck)
1 - Owner's Manual
1 - Engine Manual
1 - Steering Wheel
1 - Seat
1 - Battery Acid Pack
1 - Bag of Assembly Parts Containing:
1 - 1/4 x 2 inch Spring Pin (Steering Wheel)
4 - 11/32
inch Flatwashers (Seat Assembly)
4 - 5116 inch Split Lockwashers (Seat Assembly)
4- 5116-18
x
3/4
inch Hex Head Screws (Seat
Assembly)
YOU WILL NEED THESE TOOLS
2- 1/2 inch Wrenches (or adjustable wrenches).
2-
7116
inch Wrenches (or adjustable wrenches).
1 - Pliers
1 - Small Phillips Screwdriver with a 1/4 inch shank
1- Hammer
PARTS BAG
@©
4-11/32 Inch 4- 5/161nch
Flatwashers SpiH Lockwashers
4- 5/16 x 3/4 Inch
Hex Head Screws
4
ASSEMBLY TORQUE REQUIREMENTS -
FOR ALL NUT & BOLT, STEEL TO
STEEL APPLICATIONS, FOOT-LBS
Note 1 Note 1 Note 1
BOLT
0
Q
@
DIA.
INCHES
GR2 GRS
GR8
1/4 5-6 9-10
12-14
5/16
12-13 19-21
27-30
318
21-24 33-37 45-50
Notes:
1. Head identification for each grade.
2. Reduce the torque by 30% when installing into
aluminum parts.
3. Reduce torque by 50% when threading into
non-extruded sheet metal parts.
I
1 -114
x
2 Inch Spring Pin
2- lgnHion Keys