Using The 1-Hour Off Timer - Sanyo SAP-K71GJA Technical & Service Manual

1. 1-Hour OFF Timer
NOTE
2. Combining the 1-Hour
OFF Timer and 12-Hour
ON Timer
NOTE
18

Using the 1-Hour OFF Timer

This function causes the unit to operate for one hour and then stop,
regardless of whether the unit is on or off when this button is pressed.
The indicator in the display indicates that this function is operating.
Setting procedure:
Regardless of whether the unit is operating or stopped, press the 1 HR.
TIMER button.
appears in the display.
Cancellation procedure:
Press the ON/OFF operation button to turn the unit off, wait for the unit to stop
operating, and then press the ON/OFF operation button again.
The 1-Hour Timer function is now cancelled and the unit operates normally.
• If, while the 1-Hour Timer function is operating, the 1HR. TIMER button is
pressed once to cancel the function and then again, the unit continues to
operate for one hour from that point in time and then stops.
• If the 1 HR. TIMER button is pressed while the TIMER OFF function
operates, the OFF Timer is canceled and the unit will stop operating one
hour later.
By combining the 1-Hour OFF Timer and 12-Hour ON Timer, it is possible to
have the unit operate for just one hour from the present time, and then have it
switch on again later at a time specified by you.
(Example) Having the unit operate for just one hour from the present time,
and then switch on again three hours from the present time.
Timer setting
Operate
1 hour
Setting procedure:
STEP 1 Press the 1 HR. TIMER button.
STEP 2 Press the TIMER ON button and use the TIMER SET button
to set the unit to turn on three hours later.
• Set the 1-Hour OFF Timer and the 12-Hour ON Timer simultaneously.
Unless you set the 1-Hour OFF Timer and the 12-Hour ON Timer at the
same time, the 1-Hour OFF Timer may operate for one hour or more.
Stop
2 hours
3 hours
: http://splitoff.ru/tehn-doc.html
Operate
OI-378-18EG