Using The Sdio/Mmc Slot - Unitech PA500 User Manual

Using the SDIO/MMC Slot

Your device has an expansion slot compatible with a range of SD, SDIO, and MMC storage cards,
which are primarily used to back up or transfer files and data.
To insert a storage card:
1. Hold the device securely, then lift the rubber cover from the SDIO/MMC slot
Push the card into the slot until you feel the SD card click into place, this will signal that the card
2.
is already properly seated in the slot.
The card is secure when it is not protruding from the slot.
To remove a storage card:
Hold the device securely. Push the card in and release. The card pops out.
1.
Remove the card from the slot.
2.
Chapter 2 Using the Hardware
.
11