Infrared Connection; Bluetooth Connection - Unitech PA500 User Manual

Infrared Connection

Using infrared, you can enable short-range file exchange between your device and another IR-enabled
device.
To exchange files using IR connection:
Ensure that the IR function on both your PA500 and on other device(which you want to exchange files
1.
with) are turned on.
Locate the item you want to send.
2.
Align the IR port of your device with the IR port of the IR-enabled device, so that they are unobstructed
3.
and within a close range.
4. Tap and hold the item, then tap Beam [type of item] on the pop-up menu.
5. Tap the device that you want to send the file to.
To receive files via IR connection:
Align the IR port of your device with the IR port of the IR-enabled device, so that they are unobstructed
1.
and within a close range.
Send the file from the other IR-enabled device.
2.
3. On the Receiving Data callout, tap Yes.

Bluetooth Connection

Your device allows you to connect to any Bluetooth-enabled device in your personal area network
(PAN). Once connected, you can send and receive files to another Bluetooth-enabled device, locate and
use any of the services available on the Bluetooth-enabled device you are connected to.
To setup a Bluetooth connection:
1. Activate the Bluetooth function.
You have two options to activate your device's Bluetooth connection using the Wireless
Manager or the Bluetooth option under the Settings → Connections preferences. Once
activated, Bluetooth connection is indicated as "On" in the Wireless Manager section of the Today
screen.
– To activate Bluetooth via the Wireless Manager, see "Using the Wireless Manager" on page
28.
– To activate Bluetooth using the Settings option:
a. Tap Start → Settings.
b. On the Connections tab, tap Bluetooth.
30
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.