Table of Contents
Advertisement
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter or housing.
5)
If you have manually closed the choke, move it to the "OPEN" position as the
engine warms up.
2. APPLYING AC LOAD
1)
Start engine (see STARTING THE ENGINE).
2)
Allow the engine to warm up for 2-3 minutes before connecting tools or
appliances.
3)
Insert the plug of the electrical appliance into "AC RECEPTACLE".
** Do not take a current exceeding the specified amperage.
** Be sure that total wattage of all appliances does not exceed the rated output of the
generator.
** Limit length of extension cables: 60m for cables of 1.5mm
2.5mm
2
.
When the generator is overloaded or a short circuit is made, the CIRCUIT BREAKER will
trip to protect the circuit automatically. If CIRCUIT BREAKER trips during operation, the
generator is either over loaded or the appliance is defective.
Check the appliance and / or generator for defect or overloading and make necessary
repairs or corrections before use.
16
2
and 100m for cables of
Hide quick links:
Advertisement
Table of Contents
