Table of Contents
Advertisement
Initial Setting
7
Initial setting steps
Step 1: IP address setting
Step 2: Group setting
Step 3: Other settings
Step 4: Test run
Note
Initial setting can be set via the web through LAN. More functions can be set with the initial setting
web.
The functions that can be initialized using this unit are described in this manual. Refer to the initial
setting web operation manuals for more information.
The format in which the Web page address for each GB-24A is expressed on the Initial Setting
Web, as well as the default setting user name and password are shown below.
User
Maintenance user
Function list of GB-24A, and the Initial Setting Web.
Items
M-NET address setting
IP address setting
Function selection
Group registration
Registration of interlocked
operation with the
ventilation unit
Service switch
Other settings
*1: K transmission converter cannot be used. Select "Not used" for the K-control Units setting in the M-NET
Settings window.
http:// [IP address of the GB-24A]/g-50/ administrator.html
Note: For example, type "http://192.168.1.1/g-50/administrator.html" if the GB-24A IP address is
[192.168.1.1].
Default
Default
user name
password
initial
init
Initial Setting
GB-24A
√
(simple setting)
√
Web
√
The default value is 0.
√
*The settings of the simple setting have
the priority over other settings.
Presence/absence of K transmission
converter connection*1, local operation
√
prohibition setting, and external input
mode.
√
√
Available functions vary depending on
√
the tool.
14
Remarks
Advertisement
Table of Contents
