Assembly & Disassembly Of Side Brush; Cleaning Of Main Brush And Floor Brush; Assembly & Disassembly And Cleaning Of Front Wheel - Hoover Expert Manual

Assembly & Disassembly of Side Brush

Cleaning of Main Brush and Floor Brush

1. Clear the hair or big dust particles on two ends of the brushes regularly to improve the
cleaning performance. Clean the dust at the air intake. Clean the paper scraps or small
particles by cleaning brush directly. Rotate the brush carefully and cut the hair, yarn and other
twisted objects by scissors or pull them by hand.
2. The cleaning of the main brush and floor brush can be done by reference to the assembly
& disassembly.
Assembly & Disassembly and Cleaning of Front Wheel
1. Release the screw in the main shaft of the side brush before
you change a new one.
2. Press the side brush against the main shaft and then fasten
the screw.
1. Clean the front wheel with a clean brush.
2. Clean the cliff sensor and wall sensor with the brush.
21.