Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hoover Encore Canisfer Cleaner with Power Nozzle
Summary of Contents for Hoover Encore Canisfer Cleaner with Power Nozzle
- Page 1 Canisfer Cleaner with Power Nozzle by Hoover...
-
Page 2: Table Of Contents
The vacuum cleaner you have just purchased is a combination cleaner. It has a motorized nozzie for carpet and floor cleaning and tools for other tasks. The model and serial number are located on the bottom’of the cleaner. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information. -
Page 3: Important Safeguards
Warning. Donotuseoutdoors3onw&t&~rface~ Close supervision is necessary when any appliance is used by or near childten Do not allow vacuum cleaner to be used as a toy or to run any time. unattended at Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating agitator and any other moving parts. -
Page 4: Cleaner Descriptions
Unpack cleaner from carton and identify the parts shown. Re- move and dispose of the car& board packing. A. Canister cleaner : B. Power nozzle / C. Paper bag / D. Extension wands and hose j The cleaner assembled will iook like the drawing below. - Page 5 Cover: remove by lifting up top section of carrying handle and pulling forward. Carrying handle Check bag indicator: shows red when paper bag should be checked for fullness. Extension wands: use with power nozzle. If added length is desired when using cleaning tools, add one or both wands to hose. Spring latch: locks extension wands together or locks wand to nozzle or tool.
-
Page 6: Assembling Cleaner
1. Connect hose Insert hose end with cord into opening of cleaner, lining up largest projection on hose with largest notch of opening. Turn hose to the right to tighten. When hose is attached properly, hose cord plug will reach to receptacle on cleaner. - Page 7 To attach hose to wands, rotate plastic latch ring on hand grip until slots in opening align. Push hand grip onto wand so that button projection fits into slot. Turn plastic latch ring to lock wand in place. Push plug on power nozzle cord completely into receptacle under- neath hand grip.
-
Page 8: How To Use
Power nozzle The power nozzle adjusts automatically for cleaning hard surface floors and various heights of carpet. It is not recommended for very irregular surfaces such as brick, slate, and certain parquet floors unless it is unplugged from the cleaner. This will stop the agitator from rotating. If desired, the Wall/ Floor Brush (shown in Cleaning Tools section) can be used for this task. -
Page 9: Cleaning Tools
Cleaning tools The cleaning tools have many uses. Select the tool best suited for the cleaning task from the descriptions below. Adjust the suction regulator to select the amount of suction appropriate for the cleaning task. 1. Crevice tool may be used for radiators, dresser drawers, spaces between kitchen equipment. -
Page 10: To Clean Stairs
remove tools To connect tools, insert end of tool into extension wand and snap into position. To disconnect, press down on the center of the spring latch and remove tool. Tools’attach to hand grip by rotating plastic ring until slots in the opening align. -
Page 11: Storage
Where to buy Bags may be purchased from your local Authorized Hoover Dealer or from a Hoover Factory Service Center. When purchasing bags, be sure to give the model number of your cleaner. - Page 12 Disconnect cleaner from electrical outlet. 1. Remove cover by lifting top section of carrying handle and pulling forward. 3. Place lower notched edge of new bag collar into grooves located inside front of cleaner. Note: A bag that does not expand properly may restrict airflow. In this event, check the bag, making sure all folds are open.
- Page 13 Clearing obstructions Remove larger items from carpet and floor surfaces before vacuuming to help prevent obstructions in hose, wands or nozzle connector, and to maintain cleaning effectiveness of your cleaner. NOZZLE To check for obstructions, first turn cleaner off and disconnect from electrical outlet;...
-
Page 14: Cleaning Secondary Fitter
What to buy There are other belts manufactured that are similar in shape and size, but are not designed for the HOOVER power nozzle. Such belts do not operate the agitator correctly and may create stress which could damage your power nozzle. - Page 15 1 MOTOR PULLEY AGITATOR PU 2. Return nozzle to original position; and lift off nozzle cover. 3. If the belt is not broken, pull it off the motor pulley. 4. Lift up end of agitator. Remove old belt from agitator pulley and replace with new belt.
-
Page 16: Replacing Agitator Brushes And Brush Roll
How to replace The brush roll may be replaced with either a single or double brush roll. Single row of brushes - Hoover part No. 48414433. Double row of brushes - Hoover part No. 48414432. 1. Remove nozzle cover, agitator and belt following directions in “How to replace belt”. -
Page 17: Replacing Bag
AGITATOR END 1 3. Pull out shaft part way, then reinsert shaft to push out opposite agitator end. 4. Remove shaft, being careful to leave washer on shaft 5. Insert into other end to push out second agitator end. 6. Discard old agitator brush roll. 7. -
Page 18: If You Have A Problem
The addition of lubricant could cause damage. not add lubricant to either motor bearing. The agitator is equipped with two ball bearings that should be lubricated periodically by a Hoover Factory Service Center or an Authorized Warranty Service Dealer. If you have a problem This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. -
Page 19: Service
Authorized Warranty Service Dealer. For service under warranty, follow the instructions in the warranty provided with this product. Do not send your cleaner to The Hoover Company in North Canton for service as this will only result in a delay. - Page 20 0 11) HOOVER and v@ are trademarks of THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 12-91 S3399 Litho USA 56513-319...