Instructions for Use
Functions Introduction of Remote Controller
SPEED selection
•
Press "SPEED" button on the Remote controller, you can choose fast or slow running speed.
fast speed
slow speed
TIMER (Current TIMER Setting)
•
Press "TIMER" button first and then press " " " " buttons, you can
see a shining spot on the screen of the Remote controller switching
among hour, minute & weekday (as shown on Pic 1)
•
Press " " " " buttons to change the parameter and set the hour,
minute&weekday respectively.
Tip: During the setting, press " " button to quit; press
•
"TIMER" button to save the current setting.
SET (pre-set cleaning):
A. Pre-set TIMER
•
Press "SET" button first and then press " " " " buttons, the shining
spot on the screen of the Remote controller will switch among hour,
minute & weekday.
•
Press " " " " buttons to change the parameter to a idea TIMER that
you want the machine work.
B: Pre-set weekday:
•
During pre-setting, when the shining happens to "
shining spot will have a "beam" shining or extinguished; the weekday with the "beam"
shining is the present pre-setting.
•
Press " ALL" button to switch between selection of all
Tip: During the setting, press the " " button to quit; press the "SET" button to save the
present setting.
14.
(continued)
" press "OK" button; the presently
or no selection of all