Table of Contents
Advertisement
Chapter 6: Plumbing
Livewell System (If Equipped)
Read the Livewell System section in the Sport Boat Owner`s Manual. Filling and using the Liveweel:
1. Insert the drain plug into the drain fitting at the bottom of the tank.
2. Open the seacocks.
3. Turn on the Livewell Pump switch at the helm.
The tank should now be filling with water. If water is not pumping into the tank, possible causes are:
·
A collapsed hose or clogging debris in the system.
·
The seawater intake seacock is closed.
·
The livewell fuse is blown
To drain Livewell remove drain plug located in the aft storage.
·
Close the seacocks when leaving your boat unattended for any length of
time.
·
If seacock is left open a hose failure could flood the bilge, swamp the
batteries and even sink your boat.
·
Before using any system that has seacock make sure that seacock is
open.
·
Inspect and lubricate all seacocks annually.
!
AERATOR
VALVE
DRAIN
PLUG
PUMP
SEACOCK
OVERFILL
DRAIN
®
30
Hide quick links:
Advertisement
Table of Contents
