Using The Pre-Programmed Feature Buttons (Australian Model Only) - Uniden FP101 Operating Manual

Feature-phone series telephone with pre-programmed 5+15 memory

Table of Contents

USING YOUR FP101

USING THE PRE-PROGRAMMED FEATURE BUTTONS

(Australian Model Only)

Instant access to some of Telstra's most popular network service features have

been factory programmed into this telephone for your convenience.

Block CID

Each time you make a call, your telephone number is automatically forwarded to

the party you are calling (unless your number is a silent number). In certain

cases you may wish to prevent your number being sent.

Pick up the handset, wait for the dial tone, press the

then dial the telephone number of the person you wish to call. Your telephone

number will be withheld for this call only.

Divert On

Telstra's 'Call Forward No Answer' Service is available for diverting calls to

another number if your phone is not answered within 20 seconds (approximately

7 or 8 rings).

Pick up the handset, wait for the dial tone, press the

then hang up. The telephone will automatically dial the access code '*61#' and

will enable 'Call Forward No Answer' to the fixed number you have previously

assigned the divert to.

NOTE: To program, or re-program the fixed 'Call Forward No Answer' number, follow the

example below, replacing the number 9876 5432 with the number you wish to

divert calls to.

Pick up the handset, wait for the dial tone then press

announcement confirming that this feature has been activated, then you can

hang up.

To confirm the diverted number, turn 'Call Waiting' off, then dial your own

number. The number you are forwarding your calls to will begin to ring.

The normal Local, Mobile or National Call charges will apply.

. You will hear a long beep and a voice

button and

Table of Contents