Installation; Handset Cord Connection; Telephone Line Cord Connection - Uniden FP101 Operating Manual

INSTALLATION

HANDSET CORD CONNECTION

Plug one end of the Handset Cord (curly) into the Handset and the other end
into the jack on the side of the telephone.

TELEPHONE LINE CORD CONNECTION

Plug one end of the line cord (straight) into the telephone line jack on the back
of the telephone and the other end into the wall outlet.
NOTE: Most phone equipment available now use modular jacks. Phone cords are fitted
with a molded plastic connector which plugs into this type of jack. If you do not
have modular phone jacks, contact your local telephone company for information
about their installation.
• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected.
CAUTION
• Use caution when installing or modifying telephone lines.
13