Table of Contents
Advertisement
Fig. 2
Insert the bolts (A) with the Frontflex resting on the ground. It is easiest to in-
sert the bolts with the front linkage raised slightly upwards and the tubes (B)
parallel. Tighten the bolts until there is no space between the main frame and
the linkage.
Be extremely careful when mounting the Frontflex onto the rear of the tractor
while it is equipped with the Crackerboard. The Crackerboard must be in a
raised position and the tines must be tilted in the passive setting (see page 13
"Options").
Ñ
Unhitching
To unhitch, the procedure for hitching should be followed in reverse order.
Ñ
It is important to secure the Frontflex with the rear (A) and front (B) parking
stands to prevent the implement from tipping over.
Fig. 3
B
Remember to secure the lift arms and top link with lynch pins.
Frontflex 2000
A
A
B
side 7
Advertisement
Table of Contents
