Dismantling The Crankcase And Crankshaft; Replacing The Crankshaft Bearing; Assembling The Complete Crankshaft - Husqvarna T435 Workshop Manual

Repair instructions
7.25 Dismantling the crankcase and
crankshaft
1
See chapter "Dismantling the piston and cylinder".

7.26 Replacing the crankshaft bearing

Remove:
• the crankshaft completely from the crankcase.
1
Pull out the crankshaft bearing from the crankshaft,
see fi gure 88.
2
Fit the new bearing on the crankshaft using tool
502 50 30-18, see fi gure 89.

7.27 Assembling the complete crankshaft

1
See chapter "Assembling the piston and cylinder".
52
– English
Fig 88
Fig 89