Menu for SmartScan
Press
key and you can change several parameters
used for SmartScan.
Transfer speed
Flow control setting (Xon/Xoff), RTS/CTS, Off
Dial type
Transfer Speed
You can choose the following transfer speeds.
300,1200,2400,(9600),14400 bps
9600 is the default.
Press
to exit.
Flow Control
You can choose the following flow control settings.
Xon/Xoff is the default.
The initial display appears.
Press
Press
flow control.
Press
when desired setting is displayed.
Dial Type
You can choose the Dial Type setting.
Tone is set as a default.
You can change it to PULSE by pressing
300, 1200, 2400, (9600) bps
(TONE), PULSE
for RTS/CTS,
again for non
67
.