4.
Use the keypad to
enter a frequency for
the trunked system.
For example, enter
856.2625 (Type 1), or
enter a frequency of
the system you're
going to track.
Note: To clear a mistake while entering a
frequency, press
Then press
If the frequency is out
of the range of the
system chosen in this
step, an error
message displays.
Press
to Step 3.
5.
Press either
next channel in
the bank.
6.
Repeat steps 4 and 5
until all frequencies
have been entered.
7.
Press
searching the bank
you've programmed.
Then select the
programmed bank
using the keypad.
.
and go back
or
to select the
to begin
twice, and start over.
BANK
TRUNK
SCAN
41
1
2
3
4
5
6
7
8
9 10