Uniden BC 245XLT Owner's Manual page 51

You can also enter or display EDACS talk groups in
decimal format (0-2047). Just press and hold
the scanner between AFS and decimal mode. But you
cannot use XPAND when in decimal mode.
You can program a specific talk group such as 01-011 into
Scan List memory, or, with AFS mode, you can program
the talk groups for an entire agency (there may be
hundreds) by pressing, for example:
01,
Or you can program all the talk groups within one fleet of
an Agency by pressing, for example:
01,
Agency will be scanned)
You can also "Blockout" a large number of talk
groups by pressing
an Agency and Fleet into memory. This is a very
powerful feature!
Note: In AFS mode, Agency numbers range from
00 through 15.
If you prefer to view and program talk groups in "decimal"
mode, press and hold
EDACS trunking bank and the display method will change.
It will stay changed until you press and hold
two seconds while in EDACS operation. Decimal mode will
not work with partial talk groups entered in AFS mode into
Scan List memory.
For further details and examples, please see the Appendix.
, (all 01 groups will be scanned)
, 01, (all 01 talk groups within the 01
after entering an Agency or
for two seconds while in an
51
to switch
again for