Advertisement
5 Connection / Pairing / Tahdistus
1609
1
2
12
12
Installation of the BC 1609 STS into the mounting bracket – The zeros
GB
on the speed and cadence are flashing. To synchronise the speed and
US
cadence there are 2 options:
Set off, usually the receiver has paired with the transmitter within
1
3 or 4 wheel turns.
Turn front wheel or pedals until the KMH or cadence display stops
2
flashing. Removing the BC 1609 STS from the mounting will cut off the
connection.
TOO MANY SIGNALS are shown: Extend the distance of all
transmitters and press any button to continue. Pairing begins again.
(If tranmission fails whilst cycling and no longer works, please press the MODE 1 button
for more than 3 sec. to start manual pairing. SYNCH RESET flashes on the display.)
Pres BC 1609 STS fast på holderen.
DK
Hastighedens- og trædefrekvensens nuller blinker.
Til synkronisering af hastigheden/ trædefrekvensen findes der 2 muligheder:
Kørsel i frihjul, som regel er modtageren pairet med senderen efter 3 til 4
1
hjulomdrejninger.
Drej forhjul hhv. pedaler til KMH- hhv. trædefrekvens holder op med at
2
blinke.
Advertisement
