Cues - OBSIDIAN CONTROL SYSTEMS NETRON RDM10 User Manual

MENU: CUES
A cue is a full static snapshot of all DMX values of all ports. The
device supports 99 cues with fade and hold times, plus a link
option to loop multiple cues together. This allows small "mini"
cuelists to be created. Cues are used for standalone operation,
as a backup for signal loss or can be assigned to one of the
switch inputs. This is often used for fire alarm situations where a
system has to go to a defined state and stop all console
playback. Cues can be sent as Ethernet Universes so one device
can drive many other Netron devices.
Run Cue
Save Cue
Rename Cue
Link Cue
Resend Ethernet
SUB MENU
1-99
1-99
Fade Time
Hold Time
Link to Cue
Disable
Enable
OPTIONS / VALUES
1 – 99 Go/Off
1:Cue 1
... Save Cue? Yes/No
99:Cue 99
1 – 99 12 Character Label
Fade Time 0s – 60min
Hold Time 0s – 60min
1 – 99
Link to Cue Disable, 1 – 99 Set the next Cue
Disable
Enable
Select the desired cue
Save all values on all ports to a cue slot
Edit name of cue
Set the fade time of the cue
Set the time to hold the cue until the next cue is started
Set the next Cue
Cue data is not sent over Ethernet
Cue data is sent on the Universe number and protocol
assigned to the ports.
DESCRIPTION
Select the desired cue
Save all values on all ports to a cue slot
Edit name of cue
Set the fade time of the cue
Set the time to hold the cue until the next cue is
started
Cue data is not sent over Ethernet
Cue data is sent on the Universe number and protocol
assigned to the ports.
17