Download Print this page

Safety - PAG RMC4X Series Instruction Manual

Rack-mountable intelligent parallel charger

Advertisement

SECTION 1
1.1
This manual contains important safety and operating instructions. Please read
these fully and note all warnings before using the charger. Please follow all
instructions and retain this manual for future reference. A PDF version of this
manual is available to download from the PAG website at www.paguk.com
1.2
The PAG RMC4X charger is not intended for any use other than the charging of
batteries as detailed in Section 2 'Specification'.
1.3
IMPORTANT: Use only on AC supplies 90-265V, 50/60Hz. Supply connection
to the unit should be made using only the standard lead supplied with this
equipment.
1.4
Protect the power cord from being walked on or pinched, particularly at plugs.
Unplug this apparatus during lightning storms or when unused for long periods
of time.
1.5
Ensure that the ventilation slots are not obstructed when in use, e.g. do not
site the charger on a carpet, and ensure that nothing covers the charger when it
is in use.
1.6
WARNING: Indoor use only. To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
1.7
Although the charger is short circuit protected, extreme care should always be
taken not to short circuit the battery itself. Rechargeable batteries can deliver
power at a very high rate, and short circuiting even a partially charged battery
could result in a fire or personal injury.
1.8
The RMC4X Charger is designed only to charge the batteries listed in Section 2
Specifcation by direct connection. Do not attempt to connect any other type of
battery.
1.9
WARNING: This appliance must be earthed.
1.10 Users who are not qualified electronics technicians must not attempt to
disassemble the charger. There are no user-serviceable parts inside, and
incorrect reassembly may result in a safety hazard.
4

SAFETY

Advertisement

loading

This manual is also suitable for:

Rmc4x-pRmc4x-vRmc4x-g