Failure Display And Inspection; Technical Specification - Scandomestic IKF 160-1 User Manual

The induction hob or a
cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).

Failure Display and Inspection

If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem
F3-F8
F9-FE
E1/E2
E3/E4
E5/E6
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the induction hob.

Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Technical fault.
Possible causes
Temperature sensor failure
Temperature sensor of the IGBT
failure.
Abnormal supply voltage
Abnormal temperature
Bad induction hob heat
radiation
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
Please inspect the pot.
Please restart after the
induction hob cools down.
IKF 160-1
4 Zones
220-240V~
6400W
15